Science & Magic: Evaluation

Visual Communication

I believe my final product meets the needs of the brief as I have successfully illustrated a double page spread for a magazine using the New Scientist & Nautilus Magazine as inspiration into my final design. I have created one large portfolio illustration that fills up an entire page of the magazine article, and the magazine article I chose was ‘Of Illusion & Delusion’. I have used 100% my own design work and as this has project has been illustration based there has been no opportunity for copyright in imagery and also in the article as I have written the article myself.

I undertook secondary researching in this project in order to have a strong understanding of the two magazine companies that I am using as inspiration for. The reason for this is because I needed to know which techniques they use, what styles they have and any small things that I need to put in my final design to correlate with the magazine companies. I used the web for the majority of my research however a few of my peers had copies of the New Scientist magazine and so I was able to get a hands on feel of the magazine, of which I did take some photographs of and take inspiration from it.

The visual communication within my products is very clear and strong, the reason for this is because I used something we see in everyday life, wether it be us driving, walking, cycling or running was always see signs to direct us. My visual message of the large image was to say that there are two directions ‘religion’ or ‘science’ and both of which take their own complete different pathways. I illustrated this through use of semiotics, but bringing in the scientific elements (space, the earth, the galaxies etc.) but also with use of some religious symbols such as the yin and yang. The reason I used both scientific and religious references throughout the design was because I wanted the article to be seen as unbiased as possible, the reason for this is because the target audience would be larger instead of it being very narrow to certain people. As well as opening the target audience I wanted to reduce all possibilities to cause upset ethically, therefore needed to ensure that it was “fair”.

I do not believe that my products fail to meet the needs of the brief at all as I have successfully followed each step from the brief and completed every aspect that has been expect of me.

I feel as though the main strength of my final product would be the portfolio piece (large image) of the double page spread, the reason for this is because it attracts the eye of the audience into the magazine article. It has very vibrant colours and so brings in the readers eye. The illustration is also fairly basic and isn’t too extravagant, therefore allows the reader to have a clear understanding of the image and so the visual communication is almost impossible to be misunderstood. Another aspect of the final product I really like is the contrast between the left page and the right page of the double page spread. They are both extremely different, the illustration is very informal and almost child-like, whereas the article is very formal and professional. The reason I chose to portray this in this way was because I wanted the readers eye to be attracted to the magazine by the imagery, and then when they are reading the article they actually digest, approve and take the article seriously as the topic science and religion is extremely sensitive and I wanted to ensure it was factual.

The only weaknesses within this brief I feel would be the article itself, the reason for this is because I struggle to write professionally and formally, and so the article itself may not read as well as it potentially could if I were to have used a source from the internet. However this could cause copyright conflict which is not what I would want to happen.

Reflection of own working practises

When we were originally given this brief the deadline was fairly lengthy of which I was extremely happy with, the reason for this was because I had 3 different briefs/ project son-going at the same time. I had the charity rebranding project, a project for my charity and also this project, as well as small personal projects I work on in my spare time. As I had a lot of projects on the go at one time I was constantly working and I felt as though this helped me time keep as I had a strong structure of what I was doing and when, and when I needed to have things done by. Although in the middle of this brief we had an interim crit and I hadn’t done a lot of work up until this point therefore it may have come across as though my time keeping was poor and I hadn’t done any work, however this was not the case. The reason my crit wasn’t as strong as it could’ve been was purely down to the fact that I had multiple other projects on the case which had a much closer deadline and so I needed to prioritise my workload of importance. My charity had a tight deadline as they had to go live with the designs for the Christmas season, therefore the main focus was on that.

My understanding of the brief was crystal clear, I read the brief in-depth and had a strong understanding of what was expected of me. I had to design a double page spread using inspiration from the New Scientist and Nautilus Magazine, we had to choose wether we were going to do illustration or photography and also the article we were going to design for on the double page spread.

My research in this brief wasn’t as strong as I felt it could’ve been, however I undertook just enough research in order to have an understanding of the magazines that I needed to use as inspiration for this project. I would’ve preferred to have done a lot more research however I feel that because of the amount of projects that were going on with the charity and personal projects, I feel that this has let my research lack a little more in this brief.

I enjoyed this project as I am not as strong in illustration as I am photography therefore it was a different side of graphics design and I enjoyed advancing and improving my skills in this section of graphics design. I would really like to use illustration more in my work and will endeavour to improve over time, and I feel that Project X will be a great way for my to really test myself.

Recently I have been working very well at home which is a little out of the ordinary as I am generally distracted with my computer or TV in my room. However I have refurbished my room and moved furniture around and so as the room has a different layout and colour theme to it my mind thinks it is in a different environment and I have been working and focusing much better. The environment is very important for studying and that has been proven by psychologists and scientists.

‘Good Design’ Evaluation

Throughout this project I have been very sustainable, I have reduced the amount of possible prints are possible which is great. The way in which I reduced my prints was by doing a test print on poor quality paper originally in order to get the correct measurements, find any spelling/ grammatical errors and colour issues. After this I found a small error with measurements I went to the main print and everything printed out perfectly, therefore I minimised all potential upsets and saved myself some money with high quality printing costs.

I considered the ethical implications for this project and the main ethical implications was the conflict between science and religion. Religion causes a lot of conflict throughout the world we live in today, it causes war and science causes upset towards religions as they re being ‘proved’ wrong. The way in which I wanted to remove all possible ethical issues associated with this project was to ensure that my design was as neutral as possible, by having the same amount of points for religion and there were for science – therefore it couldn’t be unfair. Secondly I made sure that the illustration had elements of both sides within it to again make a healthy balance. Thirdly I ensured that every point in the article was factual, and also valid. The reason I thought about this was because I am a socially conscious designer and am always thinking about my future and how to progress and not just thinking about the design job (money) at the time.

For me I personally feel as though I have been more socially conscious in this project compared to previous projects as I have always been consciously thinking about ethical implications, how to prevent waste etc. I still believe that these projects are helping me more and more to become a socially conscious designer as each project I am improving.

My personal target in the future would be to always ensure that I am consciously thinking about how the audience could interpret my work, and to remove all potential upsets in my designs if need-be.

 

Science & Magic: Final Prints and Final Digital Product

Here are my final prints, although my test prints were not as planned, the test prints definitely helped me to remove all possible upsets when it came to the final expensive print.

This slideshow requires JavaScript.

I am pleased with the final prints as they have came out much better than I had anticipated, especially after the issues I had with test prints! Below are the digital final copies of each page separately.

This slideshow requires JavaScript.

Science & Magic: Design Process

When starting off the design process for my final design, I had a lot of variations running through my head as to how I could portray my message through graphics, so I started sketching out thumbnails and I used this to help me come to my final design.

I started in Adobe Illustrator and used a circle which I shaped as I felt was necessary with a black outline as shown below. I used the ellipse tool to create the shape and moved the edges using the pen tool to make it an obscure circle shape and increased the line thickness to 4pt to give it some depth.

Screen Shot 2017-12-09 at 14.10.13

I then needed to make the circle look like the earth and of course the best way to do this would be to draw countries and the sea. So I used an image from google in order to give me an understanding of what it would look like and used the pen tool to outline the countries and sea. I used the image to trace over at some times but also as a guide of what countries look like, adding my own twist to it in places.

Screen Shot 2017-12-09 at 14.11.57

In after I had outlined the world I then filled in the world with colours separating the land and the sea otherwise it looked slightly confusing, just lots of black lines floating about randomly. From here I then made a large dark blue rectangle to fit the canvas and then made a clipping mask over the earth, this then cut the earth off at the bottom making it fit into canvas. I made sure that the rectangle bled over the page by 5mm as this was a requirement in the brief.

Screen Shot 2017-12-09 at 14.12.46

This then gave the effect off that the image is in space as you can see part of the earth and the surrounding galaxies. However the galaxies, stars and other aspects will need to be added in to complete the design. Next, I made the sign which was coming out of the earth displaying two directions, which were named ‘Religion’ and ‘Science’, this shows that there are two pathways in life, and you must choose which to take, you can’t be stuck between the two.

Screen Shot 2017-12-09 at 14.13.46

I made sure that it was central framed, made a long rectangle into the centre and then two rectangles off the side of it in white. I had to play around with the pen tool for the white signs to give the ‘pointing’ effect as they were originally rectangular, but this wasn’t a large issue. Straight away this had a strong message behind it and the visual communication was clear in my opinion and also from peers. I then had to add in the stars and other things to do with space into the design, so I went on to add in the sun (with a twist) and the ISS (International Space Station).

Screen Shot 2017-12-09 at 14.14.09

The reason I made the sun with a “twist” is because the sun is circular I tried to think of as many different symbols to do with religion and the first thing that came to my head was the yin and yang. Therefore I had the sun as the main focus however there is a faded yin and yang symbol inside of it if you look closely, the reason for this was to include religious aspects and scientific aspects within the design to make it as neutral as possible. Both the sun and the ISS were just made up of shapes and one main effect which I used known as an “glowing edges”. The reason I used this effect was because it brought the illustrations out, gave them a pop which I thought was necessary as their is a strong meaning behind both of them. This effect is found under ‘Stylize’ in the ‘Effects’ tab.

Screen Shot 2017-12-09 at 14.14.37

I then went on to add in the stars which was fairly straight forward as thankfully there is a ‘star tool’ and so I made multiple different stars with this tool, all different sizes adding to the depth effect and made them all the same colour as the sun with the ‘Glowing Edges’ effect. I thought the stars completed the ‘space’ effect that I was going for, along with the sun, ISS and the earth.

Screen Shot 2017-12-09 at 14.14.17

After I had designed the main portfolio piece, I then went on to do the editorial part of the brief which was much more straight forward. I marked out a grey box with a white background which bled off the page 5mm. There is an extra black box around the page and that is the edge of the canvas, therefore illustrating that I have used a bleed. This black line will not be printed in the final product.Screen Shot 2017-12-09 at 14.15.06

I then put in the title, sub-heading and my name as I was the author of the article. I chose the font ‘Helvetica Neue Thin’ and the reason for this is because I felt as though the article needed to be neutral with a professional font. Needed to be clear cut and easy to read without any bias, therefore this fit perfectly.

Screen Shot 2017-12-09 at 14.15.11

I then wrote my article after doing plenty of research and used 2 columns, the reason for 2 columns was because I felt 3 was too squished together and it read much better in 2 columns, particularly because I reduced the space by using a rectangular box. But the rectangular box is used frequently throughout new scientist and nautilus magazines so I thought it would be ideal to follow conventions.

Screen Shot 2017-12-09 at 14.15.18

I used a drop cap of 3 lines which I thinks gives it that little extra and the letter ‘R’ really catches the readers eye. Below is the final spread in png form.

Front Page2.png

 

Science & Magic: Test Prints

When doing my test prints for my double page spread I noticed there was a major issue of which would cause the final print to be costly, so it is a good job that I noticed the issue early. When test printing the dimensions of the print were incorrect and the reason for this was because when I selected my spread to be printed on A3 Landscape it printed them at a scale of 60%. This meant it was printing at 40% less size than expected, causing a smaller print than it should’ve. Here are some images of my test prints below.

img_0214.jpg

Prints measurements turned out to be 14.5cm x 18.5cm instead of 20.5cm x 26.5cm. Therefore I knew for my final print that I needed to ensure the print was going to be of the correct size and with the extra bleed of 5mm to meet the needs of the brief.

Science & Magic: Interim Crit

We had a random interim crit halfway through the brief of which I was fairly unorganised for, however here is the presentation slides that I used in my crit. The reason I was unorganised for this interim crit was largely down to the fact that I was so busy focusing on getting my designs done for my client (charity) as this had a much higher priority than the interim crit at the time.

This slideshow requires JavaScript.

The feedback from the interim crit wasn’t positive nor negative, however my tutors told me what I already knew which was that I needed to make a start on sketching and making the design!

Science & Magic: Digital Mockups

I found it very hard to do a digital mockup for this brief down to the fact that the measurements of the magazine are abnormal and so there are very few mockup templates out on the internet for me to use to display my work digitally. Therefore the only choice I had was to use an A4 magazine mockup design and fit my product into the magazine, this made the design and aesthetics stretched and didn’t fit as I wanted it to, however it still gives off the effect of what the design would look like. Here is my digital mockup.

digital mockup

Science & Magic: Options

Illustration or Photography?

I found picking between illustration or photography very difficult as throughout our lessons we were told that illustration was the best option to go for as the photography isn’t as everyone thinks it is. We were actively told that the illustration was the best option however I didn’t let this get to me I chose which option I wanted to do after being given the brief and reading through it.

I had recently undertook a rebranding project of a celebrity and used illustration in this project and thoroughly enjoyed it. This then made me more comfortable to do illustration in this project as I wanted to improve and advance in this sector of graphics design. Although I know my photography skills are much better and I would produce something much better in photography I feel as though in order to be a good graphics designer it is essential to have a variety of skills as that is what workplaces want now. Design agencies do not want someone who is only good at photography, they want someone who has a wide range of skills, and so I thought there was no better opportunity than to explore and advance in illustration as this will enabled me to have a large experience in illustration and to become a better well-rounded graphics designer.

This is the reason for my choosing the illustration option.

Science & Magic: Sketches

As I was saying in my previous blog post for research about the ‘COEXIST’ tattoo, which heavily influenced my I went ahead to sketch this design out to see what I personally thought of it. I think it is extremely clever and unique however due to it already being previously used I couldn’t use that as my main design due to copyright reasons it would have to be a variation of it. After researching into different religious and scientific symbols I couldn’t find any symbols that could be used as lettering and so decided agains this main idea.

yJn40zcTQjel82U5i3687g

I then saw the Atheist logo which was very neat in my opinion as so I made a few sketches of this seeing if I could get the look/ effect I wanted. I made this design but I asked my peers and said to them what is this, and none of them knew what it was alone, therefore I added the words ‘theist’ after it so it read ‘Atheist’ and after this they had a strong understanding of the illustration. I thought this could be a potential for my magazine, maybe not my large portfolio piece but for my smaller image on the page with the typography.

When coming to think of my main portfolio piece (the large image for this brief) I wanted to represent that there are two pathways, and its a free choice between science and religion. I thought there is no better way to symbolise a choice in pathways than signage. Every time I am at a country park it tells me which pathway leads to what and so I thought it would be a good way to illustrate the choice between religion and science. However just a sign would be a plan boring illustration, therefore I added in scientific and religious elements to the illustration, such as space, the sun, the ISS (International Space Station), the yin and yang symbol. I’ve added some photos below of sketches I made when creating this design idea.

This slideshow requires JavaScript.

All of these sketches were thumbnail sizes, however it enabled me to have a strong understanding of what I wanted to go with and so I took this to Adobe Illustrator and put something together! I made one large sketch which had details, comments, colours, and more readable compared to the quick thumbnail sketches.

img_0170.jpg

Science & Magic: Research

Researching into Science and Religion I found very interesting because they are both such different topics and have such different views and opinions. Some articles online are saying that science is trying to prove religion wrong, others are saying that science is just a way to cause conflict between beliefs. However from my conclusion after researching I feel as though those that have practised a faith for long enough it is almost impossible to change their views or opinions on life as they are cemented in their brains that their way is right. As this is what I concluded with, I thought it would be a good idea to illustrate that there are two different pathways you can take in life, religion or science, this is because there is almost no chance for someone to agree with both science and religion.

Firstly as I said earlier I went on to a few different websites where people had spoken about their thoughts on science vs religion, whereby scientists had been interviewed and vice versa with someone practising a religion. I found these extremely eye-opening to see peoples different perceptions of each other, the reason being is because I am fairly neutral between the two and am always looking to see both sides of an argument.

I then went onto look into illustrations of science/ religion and thought the best way of doing this would be through tattoos, I have no idea why I thought of this however I found it extremely useful to brainstorm some ideas as tattoo’s are a way of being unique and a way of expressing your opinions which is what I am trying to subtly do in this brief. Here are some screenshots I took whilst I was researching on google images of some illustrations that I thought were interesting and meaningful.

This slideshow requires JavaScript.

I really liked the idea of ‘COEXIST’ with all the different religious/ scientific symbols as the word coexist means “to exist at the same time or in the same place” which is extremely fitting with science and religion as they both exist in the same place (the world) and both can cause upset. From looking at these images I then went onto sketch these out, making some variations and seeing what I could divergently think about. I will show you my sketches and process in another blog post.

In order to write my article in the magazine I used 3 different websites to get together all of my information and sources to ensure all my facts were correct, this is because being a socially conscious designer I didn’t want to be designing something that was false or incorrect. The 3 websites I used were:

These websites heavily influenced the writing of the article in my magazine for the New Scientist.

After researching about religion and science I needed to research into the ‘New Scientist’ magazine and ‘Nautilus Magazine’. The reason for this is because these are the two magazines that we are using as an influence for in our final design and also for measurements. I got my hands on a New Scientist copy of the magazines and was able to measure it using a 30cm ruler. As you can see below the measurements of the New Scientist magazine were 20.5cm x 26.5cm, these are the measurements I will use for my Adobe Illustrator file.

This slideshow requires JavaScript.

Not just researching into the magazine for the measurements I also needed to know about the magazines themselves, how often they are released, where they are based, what their generic style is throughout the magazine. The reason for this is because it will influence my editorial design heavily.

Firstly I used google images to find a variety of magazine articles that have been written by New Scientist magazine, the reason for this was to get an idea of the layout. What I realised is that both of these double page spreads have 1 primary image and then a section of text which has been sectioned off in a ‘text box’. In the brief it states that we need to have one primary image on one page as a portfolio piece and so this is definitely the route I will take when designing this double page spread.

The New Scientist magazine is a UK, London based international science magazine which is produced weekly ever since 1956 which was when it was founded. They produce both paper copy magazines and also online versions so people can subscribe to receive the magazines or read the articles online at their website.

The Nautilus Magazine however is based in USA, New York and is an online and print based magazine company however it is mainly online based releasing a chapter each week. But the printed copies are only released once every 2 months which I feel is a good thing in order to cut down on the amount of paper and cost of printing.

Although these are front covers for the Nautilus magazines I feel as though it gives me a strong understanding of what the magazine articles are like. There are very meaningful and a lot of through has gone in behind them. As you can see from the magazine cover on the right there is what looks like a bomber plane and the article is about war, however it uses chess pieces in order to represent bombs. I feel as though this is extremely clever as chess is known as a peaceful game so the contrast between war and peace is very nice. Potentially meaning that this article is about making peace instead of war? This artwork is very intelligent and I love this style.

 

 

 

 

 

Science & Magic: Brief

The Science & Magic brief was a very long written brief which included a lot of pathways that could be taken to create the final product. Lots of choices which would lead to different outcomes further down the line for future projects. Firstly I had to choose if I wanted to do the photography option or the illustration option, although I know that my photography is much stronger than my illustration I felt as though due to my previous project of rebranding celebrities I extremely enjoyed illustration I wanted to continue down this pathway. Not just because I enjoyed illustration but because I wanted to better myself as the more experience to an area the more you will improve – practise makes perfect.

The second choice we then had to choose was which topic we would make the magazine on, there were 6 article headings: Of Illusion & Delusion, Magic Girl Power, Spooky action at a distance, Cyclops Uncovered, Alchemy for the fuel age, Ghostbusters. All of these had smaller sub-heading beneath them and after reading them all I felt as though the best 2 options would be Magic Girl Power or Of Illusion & Delusion. After some careful consideration I finally opted for the Of Illusion & Delusion as I feel because I am not personally scientific or religious I will have a more neutral view/ outlook on the perspectives which shows that I am a socially conscious designer.

I have added the brief below.

This slideshow requires JavaScript.